Ansur ProSim 8 mini Plug-In requires administrator privileges to run properly. If you have not logged on to your PC as administrator, press the SHIFT key on the keyboard while right-clicking on the Ansur shortcut or ProSim 8 mini Plug-In shortcut on the desktop or Start Menu, then select "run as" administrator. You will now be able to run Ansur ProSim Mini Plug-In without any errors.

The edit box is locked and is read only. If you wish to enter/edit any value, drag the slider bar or use the LEFT "?" and RIGHT "?" arrows on your keyboard to set the desired value.

To find the ProSim 8 Ansur mini plug-in instruction:

a) If you want to execute tests sequentially one by one and enter the results individually and navigate to next test element manually then, drag and drop the test elements into the template without autosequence container
b) If you want to execute tests sequentially one by one and enter the results individually and navigate to next test element automatically then, drag and drop the test elements into the template under the autosequence container

Execution of tests in serial allows the user to simulate waveforms individually, and ProSim device resets to LOCAL mode at completion of each test
b) Execution of the tests in parallel allows user to simulate tests simultaneously, and ProSim device resets to LOCAL mode only at the completion of each Step

a) The total duration of the execution of the step is the sum of the duration set in each test elements under the step
b) If any one of the duration is set as indefinite then the step execution will be continuous until Next button or Stop button is clicked.

To create autosequence similar to the autosequence present in the ProSim
simulator follow the steps below
a) Drag and drop Autosequence container to the template
b) Drag and drop one more autosequence container under it. This becomes the step which simulates the test elements in parallel
c) Drag and drop test elements under the step
d) Save it as custom templates in the Ansur test library or to any other location in PC

You can execute factory autosequences in 2 ways
a) 1st way: Open a factory template from the Ansur template library. Click play button from Ansur toolbar and click Start button from the testguide
b) 2nd way: Open Ansur Mini Plug-In. Click Autosequence tab. Select any autosequence from the list. Click Play button. Click start button from the testguide

Firmware update to ProSim 8 can be done ONLY through USB cable.

a) Step can have following test elements under it
i. Any one test element from the ECG Simulation Test group
ii. Respiration Simulation Test
iii. Temperature Simulation Test
iv. Any one of IBP Dynamic Simulation or IBP Static pressure test from the IBP Simulation Test
group
&nnbsp;v. Only NIBP Dynamic Simulation test from the NIBP Test group
vi. SpO2 test
b) If you include test elements other than the above, Ansur displays a message box and discards those test elements