MedTester 5000c Biomedical Electrical Safety Analyzer
Easy, programmable biomedical equipment test system
Features
Easy verification of biomedical equipment to manufacturer’s specifications
medTester 5000C Biomedical Equipment Test System
The medTester 5000C is a unique, fully automated electrical safety and biomedical performance inspection device for biomedical professionals and manufacturers. All the features you need from conventional manual analyzers are standard in the medTester 5000C and are available in a virtually unlimited number of possible configurations.
Image
Image
Documentation
Manuals
medTester 5000C Biomedical Equipment Test System Datasheet
medTester 5000C Installation Guide
medTester 5000C Operator's Manual
medTester 5000C Installation Guide
Datasheet
medTester 5000C Biomedical Equipment Test System Datasheet
Models
View all models
Accessories
Miscellaneous Accessories
072-228-003 Black binding post
072-228-005 Red binding post
072-228-008 Green binding post
2710-0324 medTester 20A Receptacle
2710-0324, medTester B 20A Receptacle (part# 2193661) is used with the following products:
2716-0069 MedTester Ground Test post
Ground Pin Adapter
Part number: 2392639
Wedge Accessory for medTester 5000C
Part number: 2200668
medTester 5000C Wedge Accessory (part# 2245264)Includes:2 medTester 5000C/wedge interface cables (part# 2200668), installation instructions and hardware. Wedge Adapter (eight 25 in serial ports, as well as AT or PS/2 keyboard port)
Mini PC-Style External Keyboard
Part number: 2245061
Mini PC-Style External Keyboard (part# 2245061)(83 keys, AT or PS/2, wedge adapter required)
Cables
3010-0535 MT5KC Wedge Cable
3010-0535 MT5KC Wedge Cable (part# 2200668)For use with the following:
9501-0032FG Kelvin cable
Part number: 2392617
Printers
DB-25 to Centronics PC printer cable
Cable, printer DB25-Centronics M (part# 2200577) (for use with medTester 5000C to standard PC printer)
DB25S to DB25P Serial cable
Cable, serial DB25S-DB25P (part# 2392251)(for use with medTester 5000K to IPT-1)
Test leads, Probes, and Clips
Automation Modules
Module 02: RS232/Printer for medTester 5000C
Part number: 2245136
medTester 5000C module 02: RS232/Printer (part# 2245136)
Module 03: 100-Record Storage for medTester 5000C
Part number: 2245149
medTester 5000C module 03: 100-Record Storage (part# 2245149)
Module 05: Waveforms/Extended Testing for medTester 5000C
Part number: 2245160
medTester 5000C module 05: Waveforms/Extended Testing (part# 2245160)
Module 06: Data Transfer for medTester 5000C
Part number: 2245172
medTester 5000C module 06: Data Transfer (part# 2245172)
Module 07: medCheck for medTester 5000C
Part number: 2245185
medTester 5000C module 07: medCheck (part# 2245185)
Module 08: DEFIB Autosequences for medTester 5000C
Part number: 2245197
medTester 5000C module 08: DEFIB Autosequences (part# 2245197)
Module 09: IV Pump IPT Autosequences for medTester 5000C
Part number: 2245201
medTester 5000C module 09: IV Pump IPT Autosequences (part# 2245201)
Module 10: Competitive CMMS Interface for medTester 5000C
Part number: 2245212
medTester 5000C module 10: Competitive CMMS Interface (part# 2245212)
Module 12: SpO2 Autosequences for medTester 5000C
Part number: 2245235
medTester 5000C module 12: SpO2 Autosequences (part# 2245235)
Module 13: Transcutaneous Pacer Autosequences for medTester 5000C
Part number: 2245247
medTester 5000C module 13: Transcutaneous Pacer Autosequences (part# 2245247)
Module 14: NIBP Autosequences for medTester 5000C
Part number: 2245258
medTester 5000C module 14: NIBP Autosequences (part# 2245258)
Frequently asked questions
Make sure that you are using COMM 2 on the medtester. The correct cable to use is Fluke part number 2200252. The older part number was 3010-0467. The baud rates on both COMM 2 of the Medtester and the Impulse 4000 need to be set at 2400 baud for the connection to be successful. When you use the defib module on the 5000C the baud rate should automatically change from any baud rate to 2400 baud by itself. Therefore whatever the baud rate was set at for COMM 2 you will still get a connection. This is not true when using the pacer module on the medtester. You will need to physically change the baud rate to 2400 baud in the UTIL menu under BAUD. Make sure that the Impulse 4000 is on Main Menu Page 1 when you start the autosequence in the medtester.
