FlukeBioMed
Home  |  Products  |  Patient Simulators Fast
Contact us
Test NIBP, ECG, EKG devices, and cardiac rhythms with a patient simulator by Fluke Biomedical

ProSim™ 3 and ProSim 2 Vital Signs Simulators

The just-right device.

With just the right amount of features, the ProSim 3 and ProSim 2 Vital Signs Simulators are the perfect choice for preventive maintenance, troubleshooting and repair in the field. The just-right feature set includes:

  • ECG
  • Pacemaker
  • Arrhythmia
  • Respiration
  • Invasive blood pressure
  • Temperature
  • Cardiac output (ProSim 3 only)
  • Fetal/maternal (ProSim 3 only)
ProSim 3 and ProSim 2 Vital Signs Simulators


ProSim 8 Vital Signs Simulators

Your time is valuable.

In his book, Medical Equipment Quality Assurance, J. Tobey Clark of the University of Vermont estimated time to complete an average patient monitor PM at 50 minutes. Our team calculated approximately 40 of those minutes were deployed using patient simulators.* Then we developed a new generation of patient simulators to drastically reduce the time you spend during patient monitor preventive maintenance.

The new ProSim 8 Vital Signs Simulator is capable of performing a complete patient monitor PM in just 5 minutes.


*Other 10 minutes = electrical safety testing

ProSim 8 Vital Signs Patient Simulator
“Our validations show that after brief familiarization, a technician can test a monitor for all six parameters in all three pre-set configurations in less than five minutes.”

Dennis McMahon, CBET
WSBA Biomed of the Year 2006

ProSim 8 provides pre-sets for the six most commonly used parameters:

  • Electrocardiograph (ECG simulator)
  • Non-invasive blood pressure (NIBP simulator)
  • Invasive blood pressure (IBP patient simulator)
  • Oxygen saturation (SpO2 Analyzer)
  • Respiration patient simulator
  • Temperature patient simulator

5 Minute PMs save time and money

This sample return on investment analysis shows how reducing your patient simulator PM test
time helps both you and your facility.


How many patient monitors in your facility? 300
How many times per year do you PM? 1
How many defibrillators with patient monitor functions in your facility? 50
How many times per year do you PM? 2
Estimated time savings with ProSim 8 35 minutes per PM
ProSim: saves you: 233 hours per year
At an average billable rate of $65.00/hour, that is an annual savings of: $15,145.00


ProSim 4 Vital Signs Patient Simulator

ProSim 4 Vital Signs Simulators

Quick checks in 60 seconds.


Time savings doesn’t stop with the yearly PM. You get calls of patient monitor faults throughout your facility.

The new ProSim 4 Vital Signs Simulator is designed specifically to allow you to troubleshoot patient monitors the field in just 60 seconds.

ProSim 4 touchscreen technology allows one-touch-testing to most results

  • 12-lead ECG simulator
  • Respiration patient simulator
  • IBP patient simulator
  • NIBP simulator

ProSim SPOT Light SpO2 Tester Pulse Oximeter Analyzer

ProSim SPOT Light SpO2 Tester

15-Second SpO2 Tester

SPOT Light is lightweight and flexible with three custom presets specially-designed to make it the fastest and easiest-to-use device on the market today for SpO2 pulse oximeter functional testing. Preset programs test any combination of saturation, heart rate, perfusion, transmission, artifact noise, and r-curve in 15 seconds or less.

Search Fluke Biomedical
ResourcesProducts
Find Resources

Family of Products


Want to explorer further? Check out a specific patient simulator below:

ProSim 8 Vital Signs Simulator »
ProSim 4 Vital Signs Simulator »
ProSim 3 and 2 Vital Signs Simulator »
ProSim SPOT Light SpO2 Tester »

Show me all the patient simulators »
Fluke Biomedical ProSim Cable Selection Guide
Firmware and software updates for Fluke Biomedical products
ProSim 8 Vital Signs Patient Simulator demo video
ProSim 4 Vital Signs Patient Simulator demo video

Follow us Fluke Biomedical on Facebook Fluke Biomedical on Twitter Fluke Biomedical on YouTube Fluke Biomedical on LinkedIn Home | Site Map | Fluke Corporation | Terms and Conditions | Privacy Statement | Disclaimer © 1995 - 2014 Fluke Corporation