QED 6 Plug-In

The Ansur QED 6 Plug-In is an add-on module for the Ansur Test Automation software application. The plug-in is used in conjunction with the QED 6 Defibrillator Analyzer to provide test automation capabilities using the Ansur PC software.

  

 

Introduction

This read me file contains the latest information for Fluke Biomedical's Ansur QED 6 Plug-In.

 

Serial Cable Requirements

The QED 6 requires a custom serial cable to communicate with a PC. (Part number 3370512 as of this writing.) This cable requires that a specific end of the cable be attached to the PC. Keep the orientation of the cable in mind when troubleshooting communications problems with the QED 6.

History

This chapter describes the changes made between each new released version.

Release 1.0.3

  • Plug-in works with Laptop + Docking station.

Release 1.0.2

  • Communication problem resolved related to USB to serial converter.

Release 1.0.1

  • Fixed a problem related execution of test with different models of QED6.

Release 1.0.0

  • V1.0.0 is the first release of the QED 6 plug-in.

 

Language Changes

This chapter describes the changes made to the language file in each new version.
The list includes only versions where the language file was changed.

Release 1.0.0

  • Initial revision.

 

 

Fluke Biomedical

PO Box 9090

Everett, WA 98206-9090 USA

 

Fluke Biomedical France

30, rue Paul Claudel

91000 EVRY, France


For more information call:
U.S.A. (800) 648-7952 or Fax (425) 446-5629
Europe / M-East / Africa +33 1 60 78 88 99 or Fax +33 1 60 78 68 39
Other countries +1 (425) 446-6945 or Fax +1 (425) 446-5629

Internet: http://www.flukebiomedical.com

 

© 2008 Fluke Biomedical. All rights reserved.