Fluke Biomedical - Trusted for the measurements that matter to medical industry professionals.
Home  |  Education and Training  |  Electrical Safety Testing
Electrical Safety Testing and Training

Advantage Training - Electrical Safety Testing


Biomedical Training
Defibrillator Testing
Electrical Safety Testing
Gas Flow and Ventilator Testing
Infusion Pump Testing
Patient Monitor Testing
Oscilloscope Troubleshooting
X-Ray System Testing


Start your biomedical engineering training today.

Electrical safety testing was the first mandate of biomedical engineering, and why biomedical engineering was brought into the hospital as a functional area in the 1970’s. Today there are many electrical safety standards, most of which have been harmonized with the IEC standards found under IEC 60601.

The basis standards (IEC 60601-1 and IEC 62353) are constantly under review and revision. Not only is it hard to keep up, it is also not easy to understand how to apply testing methodologies, or testing limits.

What can I learn here?

  • Similarities and differences between tests, terminology, and standards
  • How to easily perform basic tests; simple solutions for in-depth testing
  • How automatic test instrument configuration and measurement data collection make testing more efficient
  • How visually-guided testing with predetermined test limits standardizes work, reduces human error

Fluke Biomedical Advantage Training Advantage Training

If you have any questions regarding Advantage Training, please contact us at advantage.training@flukebiomedical.com.

Biomedical training and device analysis - Advantage Training by Fluke Biomedical
ESA620 Electrical Safety Analyzer for IEC 60601 compliance
Frequently asked questions for the products in the Fluke Biomedical catalog
Follow us Fluke Biomedical on Facebook Fluke Biomedical on Twitter Fluke Biomedical on YouTube Fluke Biomedical on LinkedIn Home | Site Map | Terms of Use | Terms and Conditions | Privacy Policy | Disclaimer © 1995 - 2018 Fluke Corporation