TNT 12000 Firmware Upgrade

TNT 12000WD Detector Firmware version 1.8 (.exe) »
This version stops measuring radiographic exposures over ten seconds in duration. For any exposures longer than ten seconds the TNT 12000WD will show only the first ten seconds. After fluoro exposure end, displays the average values over the entire exposure time for all measured values except kVp max and Dose. kVp max displays the highest reading over the entire exposure.

TNT 12000D Display Firmware version 3.16 »
This version supports the TNT 12000WD, TNT 12000WD mAs, TNT 12000 DoseMate, and TNT 12000 DoseMate mAs. In addition to the features added in version 3.13 (Wireless Signal Strength indicator and Display Configuration) version 3.16 offers improved wireless communication. When a TNT 12000D Display is upgraded from version 1.8 or earlier or 2.08 or earlier, the new user manual (March 2010, Rev. 1) should also be downloaded as it contains information for all of the new features.

TNT 12000 Communication Firmware version 2.3 »
This version supports the TNT 12000WD and TNT 12000 DoseMate and offers improved wireless communication. Please note that this version is only to be used with devices where the last digit of the Hardware Version is equal to or less than six (6). The Hardware Version is displayed on the Connection Screen as xx-xx-xx, please verify that the last two digits shown are 06 or less before performing this update. Updating to the wrong version of firmware will require that the unit be returned for reprogramming.

TNT 12000 Communication Firmware version 5.1 »
This version supports the TNT 12000WD, TNT 12000WD mAs, TNT 12000 DoseMate, and TNT 12000 DoseMate mAs and offers improved wireless communication. . Please note that this version is only to be used with devices where the last digit of the Hardware Version is greater than six (6). The Hardware Version is displayed on the Connection Screen as xx-xx-xx, please verify that the last two digits shown are greater than 06 before performing this update. Updating to the wrong version of firmware will require that the unit be returned for reprogramming.

TNT 12000 DoseMate DSP Firmware version 1.8 »
This version supports all versions of the TNT 12000 DoseMate and TNT 12000 DoseMate mAs.