IDA 4 Plus PPC Tab 1
Testing with the IDA 4 Plus Calculate your savings
Specifications
IDA 4 datasheet »
Training module »
Whitepaper: Accuracy check for infusion pumps using IDA 4 Plus »

Refer this page »

The world's most trusted infusion pump analyzer with over 20 years of demonstrated accuracy and reliability!


Note: IDA 4 is not intended for use on patients
Accuracy First!
Accurate analysis of infusion pump performance is critical to patient care. Incorrect readings from a poorly-performing infusion pump could put a patient at great health risk. Make sure your infusion pump test methodology accurately reflects the performance of infusion pumps in your fleet accurately.

The IDA 4 Infusion Pump Analyzer is an in-depth infusion pump tester that verifies flow rate, delivered volume, occlusion pressure, PCA bolus, and dual flow rate for any brand of infusion pump. A graphical display provides instantaneous measurement and view of infusion pump performance.

IDA 4 Plus measures volume using a miniature burette with infrared sensors along its length. The sophisticated electronics of this infusion device tester ensure accuracy. The IDA 4 Plus is the gold standard for infusion pump testing with the highest number of users worldwide.

Time is of the Essence
The IDA 4 Infusion Device Analyzer can test up to four infusion pumps or channels at once, allowing you to move on to other tasks while letting the IDA 4 take care of infusion pump testing and documentation. For example, a hospital maintaining 350 infusion pumps can save up to 140 hours annually with reduction in testing and documentation time with an IDA 4 equipped with 4 channels. Click here to see how much you can save

Ensure Compliance
IDA 4 allows you to save test results to either internal memory or on your PC for easy archiving and storage. Electronic data collection allows reduction, if not elimination, of human error. The IDA 4 also provides the ability to create electronic test protocols with Ansur Software to document the entire test and results per the required procedure in a single report. Pass regulatory audits with confidence by having easy access to test records when you need it!

Join thousands of professionals worldwide to test infusion pumps accurately and thoroughly for:
Hospitals
Incoming inspection
Prenventive maintenance
Post repair
Manufacturers
Product evaluation
Quality assurance
Service fleet

© 1995 - 2011 Fluke Corporation